Gate Valve Tools & Accessories


New call-to-action

2" Socket Ratchet Wrench

$ 138.60

This versatile wrench is handy either in the field, where it can be used to operate gate valves before they are buried, or in a plant or pump station where it can replace the standard handwheel on non rising stem valves so it can't be operated by unauthorized personnel. Ideal for quickly opening and closing tapping valves. Rugged heavy duty steel construction with rubber handle for comfort and safety.

Adjustable Stem Guide

$ 138.89

Stem guide that includes adjustments from 2" - 26".

Box Seat (Plain)

$ 5.16

The Box Seat is a high-strength, plastic device designed to eliminate the annoying and costly problem of having to re-dig a valve box base that has shifted off center during the backfilling process. The Box Seat is easily installed by removing the valve's operating nut and sliding it over the valve stem. When in place, it automatically centers the valve box base around the operating nut and prevents the backfill material from interfering with valve operation while still allowing surface water to drain out.

Box Seat (QWP)

$ 5.16

The Box Seat is a high-strength, plastic device designed to eliminate the annoying and costly problem of having to re-dig a valve box base that has shifted off center during the backfilling process. The Box Seat is easily installed by removing the valve's operating nut and sliding it over the valve stem. When in place, it automatically centers the valve box base around the operating nut and prevents the backfill material from interfering with valve operation while still allowing surface water to drain out.

Broken Nut Valve Wrench

$ 508.00

When a gate valve operating nut is broken off you can be left in a desperate situation. The Broken Nut Valve Wrench can solve your problem quickly. First, remove the broken nut from the valve box using one of the handy wrenches found on page 19 of this catalog. The Broken Nut Valve Wrench is attached to a T-Handle Wrench with a bolt and nut. The wrench is lowered in the valve box and the spring loaded pipe wrench jaws are slid around the stem. When the wrench is turned in the proper direction, the jaw on the wrench will grab the valve stem, allowing you to open or close the valve while standing at ground level. The spring loaded jaw is reversible, allowing you to open or close a valve for both open right and open left valves.

Broken Nut Valve Wrench Complete Assembly

$ 569.00

When a gate valve operating nut is broken off you can be left in a desperate situation. The Broken Nut Valve Wrench can solve your problem quickly. First, remove the broken nut from the valve box using one of the handy wrenches found on page 19 of this catalog. The Broken Nut Valve Wrench is attached to a T-Handle Wrench with a bolt and nut. The wrench is lowered in the valve box and the spring loaded pipe wrench jaws are slid around the stem. When the wrench is turned in the proper direction, the jaw on the wrench will grab the valve stem, allowing you to open or close the valve while standing at ground level. The spring loaded jaw is reversible, allowing you to open or close a valve for both open right and open left valves.

Handwheel for 2" Square Operating Nut

$ 46.86

The Handwheel is made of ductile iron for strength. The square head cap screw with cup point assures that the handwheel stays locked onto the operating nut. The raised lettering is ½" high minimum. The 2" square nut protrudes ¾" above the handwheel top surface which provides the option of using a Standard Gate Wrench. An optional ¾" speed handle is available for valve exercising. Ranges from 10" - 24" in diameter.

Revolving Speed Handle for Handwheel

$ 37.48

The Handwheel is made of ductile iron for strength. The square head cap screw with cup point assures that the handwheel stays locked onto the operating nut. The raised lettering is ½" high minimum. The 2" square nut protrudes ¾" above the handwheel top surface which provides the option of using a Standard Gate Wrench. An optional ¾" speed handle is available for valve exercising.

Rounded Nut Grabber

$ 429.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location. The Template can be purchased separately as well.

Rounded Nut Grabber Complete Assembly

$ 490.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location.

Rounded Nut Grabber Template

$ 24.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location.

T-Handle for Broken Nut Valve Wrench

$ 61.00

When a gate valve operating nut is broken off you can be left in a desperate situation. The Broken Nut Valve Wrench can solve your problem quickly. First, remove the broken nut from the valve box using one of the handy wrenches found on page 19 of this catalog. The Broken Nut Valve Wrench is attached to a T-Handle Wrench with a bolt and nut. The wrench is lowered in the valve box and the spring loaded pipe wrench jaws are slid around the stem. When the wrench is turned in the proper direction, the jaw on the wrench will grab the valve stem, allowing you to open or close the valve while standing at ground level. The spring loaded jaw is reversible, allowing you to open or close a valve for both open right and open left valves.

T-Handle for Rounded Nut Grabber

$ 61.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location.

Valve Setter

$ 64.20

The Valve Setter improves safety and simplifies the lowering of 4" to 12" gate valves with 2" operating nut into the trench.