Waterworks Tools and Supplies


Hydrant Setter and Marker Sale CTA

1 ¼" Service Box Extension with 2 Set Screws

$ 13.48

Our service box extensions are made from Schedule 40 pipe and are used to increase the height of an existing service box or to accommodate greater depth in a new installation. The service box extension is installed by removing the existing cover and sliding the extension over the top of the box pipe. The extension is adjusted to the desired height and the set screw(s) are tightened to lock it in place before replacing the cover. Extensions are made in lengths from 3" to 24".

1" Service Box Cleaning Auger

$ 61.42

Place the auger in the service box and rotate. The rotation of the auger will bring dirt and debris to the top of the box where it will fall out on to the ground. Now supplied with rubber handles.

1" Service Box Extension with 1 Set Screw

$ 6.90

Our service box extensions are made from Schedule 40 pipe and are used to increase the height of an existing service box or to accommodate greater depth in a new installation. The service box extension is installed by removing the existing cover and sliding the extension over the top of the box pipe. The extension is adjusted to the desired height and the set screw(s) are tightened to lock it in place before replacing the cover. Extensions are made in lengths from 3" to 24".

1" Service Box Extension with 2 Set Screws

$ 8.83

Our service box extensions are made from Schedule 40 pipe and are used to increase the height of an existing service box or to accommodate greater depth in a new installation. The service box extension is installed by removing the existing cover and sliding the extension over the top of the box pipe. The extension is adjusted to the desired height and the set screw(s) are tightened to lock it in place before replacing the cover. Extensions are made in lengths from 3" to 24".

1" Service Box Extension with 3 Set Screws

$ 30.63

Our service box extensions are made from Schedule 40 pipe and are used to increase the height of an existing service box or to accommodate greater depth in a new installation. The service box extension is installed by removing the existing cover and sliding the extension over the top of the box pipe. The extension is adjusted to the desired height and the set screw(s) are tightened to lock it in place before replacing the cover. Extensions are made in lengths from 3" to 24".

1/2" x 100' Cable w/3/4" Pressed-On Stud

$ 291.00

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

1/2" Drive Micrometer Adjustable Tourque Wrench

$ 240.00

Armstrong Micrometer Torque Wrenches offer precise torque application in an easy-to-use durable design. Armstrong's Micrometer "Click" style torque wrenches are forged, heat treated, and assembled in the USA using high alloy, domestically produced steel. Manufactured to rigid specifications ensures torque wrenches are of unequaled strength, durability, and accuracy.

1/2" x 75' Cable w/3/4" Pressed-On Stud

$ 218.25

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

1/2"x 50' Cable w/3/4" Pressed-On Stud

$ 160.00

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

118 Piece Metric & Fract. Tool Set

$ 302.95

103 Sockets & Accessories, 5 Wrenches, 10 Miscellaneous Tools, Weight: 20 lbs.

12" Rolling Head Pry Bar

$ 35.00

Made of forged steel and heat treated for strength. Black oxide finish.

16" Adjustable Hydrant Wrench

$ 29.35

This hydrant wrench is adjustable to fit up to 1 ¾" pentagon operating nuts and pumper or steamer caps. Also fits pin and rocker lug hose couplings with its double spanner. Now with rubber coated handle for a better grip. Zinc plated for corrosion protection.

18" T Handle Service Box Wrench Pent End

$ 26.50

This wrench is used to remove the plug from plug-type service box covers.

18" T Handle Service Box Wrenches 2-Hole End

$ 30.46

This T-Handle Service Box Wrench is used to remove 2-hole service box covers.

18" T Handle Service Box Wrenches Curb End

$ 38.30

This wrench fits on the T-head of the service valve for opening and closing operations. Designed to work with 1¼" & 2½" Buffalo style service boxes.

18" T Handle Service Box Wrenches Rod End

$ 27.91

This wrench fits the service box rod and is used to open or close the service valve.

18" T-Handle SB Wrench Pent with Curb Kicker

$ 36.38

This handy wrench has a sliding cover lock which eliminates the common problem in plug-style service box covers; the cover unscrews while attempting to remove a stubborn pent plug. The slotted curb kicker holds the cover in place while the pent nut is unscrewed. This ruggedly built wrench comes in 3 ft. and 4 ft. lengths. Other lengths can be ordered.

2 ½" Service Box Adjusting Tool, Screw Type

$ 60.82

This 4 foot long wrench is used to adjust the length of 2 ½" Buffalo Style service boxes. Simply put wrench end into service box opening, and turn.

2 ½" Service Box Cleaning Auger

$ 72.96

Place the auger in the service box and rotate. The rotation of the auger will bring dirt and debris to the top of the box where it will fall out on to the ground.Now supplied with rubber handles.

2" Socket Ratchet Wrench

$ 138.60

This versatile wrench is handy either in the field, where it can be used to operate gate valves before they are buried, or in a plant or pump station where it can replace the standard handwheel on non rising stem valves so it can't be operated by unauthorized personnel. Ideal for quickly opening and closing tapping valves. Rugged heavy duty steel construction with rubber handle for comfort and safety.

2-pc Capped End Screwdriver Pry Bar Set

$ 96.48

All new two composite, ergonomically designed, capped-end handle. New capped-end handle allows the user to strike the bar with a hammer without damaging the head. 18" and 24" lengths.

22" Valve Box Cover Tongs

$ 57.36

Features: Rugged steel design, Zinc plated for rust protection, Extra long for less bending, Rubber grips on handles for comfort and safety

3-pc Line-Up Pry Bar Set

$ 93.68

Features: Made of forged steel and heat treated for strength. Black oxide finish. 2-Line-up Pry Bars, 14" and 20". 1-16" Rolling Head Pry Bar.

3-pc Rolling Head Pry Bar Set

$ 155.75

Made of forged steel and heat treated for strength. Black oxide finish. 3 Lengths: ½" x 12", 5/8" x 16" and ¾" x 21".

3/4-2" Combo Flare and Rounding Tool in Canvas Bag

$ 242.89

We have redesigned the standard rounding tool by adding more gripping area and by knurling the handle, which assures a positive grip and safer operation. Drive the tool part way in to round, or all the way in to flare. The tubing end has been extended for better rounding and bored out to reduce weight. Machined pressure relief ports are added to prevent the tool from rebounding should back-pressure develop during either the rounding or flaring process. ¾" through 2" sizes are available and feature black oxi.

3/8" x 75' Cable 7.44 ton test

$ 82.50

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

3/8"x 100' Cable 7.44 ton test

$ 165.00

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

3/8"x 50' Cable 7.44 ton test

$ 66.00

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

4 ½" VB Clam Spoon

$ 71.00

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

4 ft. Hydrant Spring Flag w/4"x5" Flag

$ 19.87 $ 23.38

Spring-loaded Hydrant Flags are made of one-piece galvanized spring steel for corrosion resistance. The mounting bracket is part of the spring; a washer is supplied. Four 6" reflective weatherproof bands (two red and two white) are applied to the top section of the hydrant marker for superior visibility.

4"X5" Replacement Hydrant Flag

$ 8.93 $ 10.50

Spring-loaded Hydrant Flags are made of one-piece galvanized spring steel for corrosion resistance. The mounting bracket is part of the spring; a washer is supplied. Four 6" reflective weatherproof bands (two red and two white) are applied to the top section of the hydrant marker for superior visibility.

48" Fiberglass Utility Probe

$ 35.79

Tile probes are used as a quick and easy way to find buried water, sewer and drain lines, or electrical conduit. These simple devices can save thousands of dollars and many man hours repairing a broken line. Constructed of either fiberglass or steel for durability.

5 ft. Tamping Bar

$ 98.35

The angled bottom plate forces dirt under the pipe, insuring proper bedding. The top of the bar is forged flat to give it more bearing surface, helping it to hold better in the dirt while pushing pipe together. Features: 11/8" round steel stock. 5/8" x 4" x 4" bottom plate angled to force dirt under pipe. Forged flat on top end for pushing pipe together. Weight: 16 lbs.

Adjustable Stem Guide

$ 138.89

Stem guide that includes adjustments from 2" - 26".

All-In-One Combo Key

$ 275.00

The Combo Key set combines six (6) waterworks service and valve box keys and wrenches into one lightweight assembly (approx. 23 lbs.). Its compact design makes it easy to store. The gate valve wrench and curb box key utilize a 4 ft. to 7 ft. telescoping shaft. All components slide together and lock in place with locking pins. Consists of: 1 ¼" x 41" main shaft, 1" x 40" extension shaft, 1" x 22" handle, 5/8" x 37" rod end shaft, Pentagon end (attached to main shaft), 2-Hole cover end, 2" Gate valve end with 2-way swivel, Curb end, Adjustable hydrant wrench end 5 push pins.

Aluminum Cover Hook

$ 81.85

In addition to the loop handle style, we've added a pick and hammer style handle, making this tool more practical. The pick end is used to clean out the pick holes and the hammer end can be used to help loosen the cover. The handle is offset 90° from the pry end and allows for two-handed operation and better leverage. In most cases this tool will be all you need to open your manhole covers. The Aluminum Manhole Cover Hook is lightweight, yet strong and it will not cause sparks that could ignite dangerous sewer gases.

Aluminum Ratchet Gate Wrench

$ 247.00

The new Ratchet Gate Wrench Handle makes operating a gate valve much easier. No more pushing and pulling a solid handle around and around. The gate wrench handle can be purchased separately or with standard 6 ft. gate wrench extension. It also can be adapted to existing gate wrenches by cutting off the handle and inserting and pinning the two together (template and pin included). Features: One man operation, Rubber grips for safety and comfort, Standard 6 ft. length. Other lengths available on request., 2" socket can be provided in swivel design if desired.

Aluminum Ratchet Handle

$ 167.00

The new Ratchet Gate Wrench Handle makes operating a gate valve much easier. No more pushing and pulling a solid handle around and around. The gate wrench handle can be purchased separately or with standard 6 ft. gate wrench extension. It also can be adapted to existing gate wrenches by cutting off the handle and inserting and pinning the two together (template and pin included). Features: One man operation, Rubber grips for safety and comfort, Standard 6 ft. length. Other lengths available on request., 2" socket can be provided in swivel design if desired.

B-Screw on Bull Head

$ 65.00

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Box Seat (Plain)

$ 5.16

The Box Seat is a high-strength, plastic device designed to eliminate the annoying and costly problem of having to re-dig a valve box base that has shifted off center during the backfilling process. The Box Seat is easily installed by removing the valve's operating nut and sliding it over the valve stem. When in place, it automatically centers the valve box base around the operating nut and prevents the backfill material from interfering with valve operation while still allowing surface water to drain out.

Box Seat (QWP)

$ 5.16

The Box Seat is a high-strength, plastic device designed to eliminate the annoying and costly problem of having to re-dig a valve box base that has shifted off center during the backfilling process. The Box Seat is easily installed by removing the valve's operating nut and sliding it over the valve stem. When in place, it automatically centers the valve box base around the operating nut and prevents the backfill material from interfering with valve operation while still allowing surface water to drain out.

Broken Nut Valve Wrench

$ 508.00

When a gate valve operating nut is broken off you can be left in a desperate situation. The Broken Nut Valve Wrench can solve your problem quickly. First, remove the broken nut from the valve box using one of the handy wrenches found on page 19 of this catalog. The Broken Nut Valve Wrench is attached to a T-Handle Wrench with a bolt and nut. The wrench is lowered in the valve box and the spring loaded pipe wrench jaws are slid around the stem. When the wrench is turned in the proper direction, the jaw on the wrench will grab the valve stem, allowing you to open or close the valve while standing at ground level. The spring loaded jaw is reversible, allowing you to open or close a valve for both open right and open left valves.

Broken Nut Valve Wrench Complete Assembly

$ 569.00

When a gate valve operating nut is broken off you can be left in a desperate situation. The Broken Nut Valve Wrench can solve your problem quickly. First, remove the broken nut from the valve box using one of the handy wrenches found on page 19 of this catalog. The Broken Nut Valve Wrench is attached to a T-Handle Wrench with a bolt and nut. The wrench is lowered in the valve box and the spring loaded pipe wrench jaws are slid around the stem. When the wrench is turned in the proper direction, the jaw on the wrench will grab the valve stem, allowing you to open or close the valve while standing at ground level. The spring loaded jaw is reversible, allowing you to open or close a valve for both open right and open left valves.

Cable Cutter

$ 157.61

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Cable Grab

$ 370.00

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Canvas Bag Only

$ 39.00

A canvas tool bag perfect for holding a deep well socket set, flare and combo rounding tool, or a variety of other small hand tools.

Cast Iron Pipe Bursting Wedge

$ 56.89

This Cast Iron Pipe Bursting Wedge has dimensions of 1½" x 12½"

Catch Basin Grate Sling

$ 164.75

All slings and setters are pull tested and tagged. Call for certifications.

Centering Rod Adapter for 2 ½" Service Box

$ 16.09

The 2 ½" Centering Rod Adapter is self-centering, assuring correct alignment of the curb stop, service box rod and curb box wrench in Buffalo Style service boxes. The Centering Rod Adapter fits all curb stops. The 5/8" shaft is heavier than most service box rods making it strong enough to be used with 2" curb stops.

Cleaner Handle Assembly

$ 40.00

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

Combination Valve & Curb Key Set

$ 349.80

The Combination Valve & Curb Key Set takes the place of several waterworks wrenches. All components are stored in the heavy duty canvas bag which is rolled up and stored in your vehicle. You'll always have the right wrench available to operate any service or gate valve. Consists of: 1 Carrying bag, 1 2 Hole end, 1 2' Handle w/debris cleaner, 1 Gate wrench end, 3 3' Extension shafts, 1 Curb end ¾"-2", 1 3' Rod end shafts, 1 Pent End, 5 Push pins.

Combo Flare & Rerounding Tool

$ 28.95

We have redesigned the standard rounding tool by adding more gripping area and by knurling the handle, which assures a positive grip and safer operation. Drive the tool part way in to round, or all the way in to flare. The tubing end has been extended for better rounding and bored out to reduce weight. Machined pressure relief ports are added to prevent the tool from rebounding should back-pressure develop during either the rounding or flaring process. ¾" through 2" sizes are available and feature black oxi.

Corporation E-Z Out

$ 54.40

The Corporation E-Z Out is used to remove ½" to 1" corporation stops that have broken-off in the pipeline. Two sizes are available: ½" to ¾" and ¾" to 1".

Curb x Pent SB Wrench with Extended Shaft

$ 82.81

One end of this wrench has a curb end and is used to open or close the valve without a rod. The other end is used to remove the plug from plug-type service box covers. Designed to work with 1¼" & 2½" Buffalo style service boxes.

Curb x Pent Slide Handle Service Box Wrenches

$ 72.82

The Slide Handle makes this wrench more versatile than onepiece wrenches where the handle is fixed on one end or the other. The Rod end fits the service box rod and is used to open or close the service valve. The Pent end is used to remove the plug from plug-type service box covers.

Deep Well Socket Set (in bag)

$ 179.67

These deep well sockets are ideal for use with Repair Clamps and Pipe Couplings. Features: All steel construction. Six point socket for maximum surface contact. Approximately 7" overall length for use on clamps and couplings. Works with standard ?" drive ratchet. Recessed "hand hold" area reduces the chances of dropping. Withstands minimum of 270 ft. lbs. of torque. Sizes: 7/8", 15/16", 11/16", 11/8" and 1 ¼". Black industrial finish. Deep Well Sockets come in a heavy duty canvas bag which can be rolled up for easy storage

Deep Well Sockets w/ 1/2" Drive

$ 27.75

These deep well sockets are ideal for use with Repair Clamps and Pipe Couplings. Features: All steel construction. Six point socket for maximum surface contact. Approximately 7" overall length for use on clamps and couplings. Works with standard 1/2" drive ratchet. Recessed "hand hold" area reduces the chances of dropping. Withstands minimum of 270 ft. lbs. of torque. Sizes: 7/8", 15/16", 11/16", 11/8" and 1 ¼". Black industrial finish.

Folding Handle Telescopic Gate Wrench

$ 122.73

The folding handle model allows for easy storage and shipping. It has an adjustment length of 52"-84". The bottom shaft is made of 1 ¼" heavy wall tubing and the telescopic section is made of 1" square tubing. The handle is 24" long and made of 1" solid round stock.

Gate Stem Extension Bottom Nut

$ 12.89

Gate Stem Extension Nuts allow you to make your own gate valve extension stems by simply welding, pinning or bolting a length of pipe between them. They are available with attached pipe (shown below) designed to fit inside standard 1 ¼" pipe, or as nuts only. Gate stem extension nuts are available in stainless steel on request.

Gate Stem Extension Bottom Nut w/Pipe

$ 23.64

Gate Stem Extension Nuts allow you to make your own gate valve extension stems by simply welding, pinning or bolting a length of pipe between them. They are available with attached pipe (shown below) designed to fit inside standard 1 ¼" pipe, or as nuts only. Gate stem extension nuts are available in stainless steel on request.

Gate Stem Extension Top Nut

$ 24.47

Gate Stem Extension Nuts allow you to make your own gate valve extension stems by simply welding, pinning or bolting a length of pipe between them. They are available with attached pipe (shown below) designed to fit inside standard 1 ¼" pipe, or as nuts only. Gate stem extension nuts are available in stainless steel on request.

Gate Stem Extension Top Nut w/Pipe

$ 33.59

Gate Stem Extension Nuts allow you to make your own gate valve extension stems by simply welding, pinning or bolting a length of pipe between them. They are available with attached pipe (shown below) designed to fit inside standard 1 ¼" pipe, or as nuts only. Gate stem extension nuts are available in stainless steel on request.

Gate Wrench Extension Stems

$ 74.08

Each Extension Stem has a centering ring to keep it aligned in the valve box. It has a 2" heavy square socket on one end and a 2" heavy square nut on the other. Shafts are 1 ¼" Schedule 40 pipe. Other shafts available on request. *Optional cup point set screws are available on request.

Hammer Lock

$ 30.98

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Hand Pentagon Wrench

$ 10.69

This handy wrench is used for pentagon head bolts used in service boxes, repair lids and meter box covers. Made of steel for extra strength. There are two sizes available: 27/32" and 1 1/32".

Handwheel for 2" Square Operating Nut

$ 46.86

The Handwheel is made of ductile iron for strength. The square head cap screw with cup point assures that the handwheel stays locked onto the operating nut. The raised lettering is ½" high minimum. The 2" square nut protrudes ¾" above the handwheel top surface which provides the option of using a Standard Gate Wrench. An optional ¾" speed handle is available for valve exercising. Ranges from 10" - 24" in diameter.

High Security Service Box Extractor

$ 26.77

The bronze Locking Device is placed on the service valve which prevents operation of the valve using a standard service box wrench. Because it's made of non-magnetic bronze, it can not be removed using a magnet. To operate the service valve or to remove the locking device place the Extractor Tool down the service box and inset it into the Locking Device until the spring pin snaps into the spring pin hole.

High Security Service Box Locking Device

$ 33.45

The bronze Locking Device is placed on the service valve which prevents operation of the valve using a standard service box wrench. Because it's made of non-magnetic bronze, it can not be removed using a magnet. To operate the service valve or to remove the locking device place the Extractor Tool down the service box and inset it into the Locking Device until the spring pin snaps into the spring pin hole.

Hydrant Marker 1/2" Rehbar

$ 9.15 $ 10.76

Hydrant Markers: Double dipped in Safety Orange color paint, 2 reflective, weatherproof stickers are supplied so hydrants can be easily located at night, Standard rods are ½" with ½ loop for easy installation, Large 4 ½" round hydrant flag-reduces chance of injury, Individually wrapped and packed 10 to a bundle

Hydrant Marker 3/8" Galvanized

$ 11.90 $ 14.00

Hydrant Markers: Double dipped in Safety Orange color paint, 2 reflective, weatherproof stickers are supplied so hydrants can be easily located at night, Standard rods are ½" with ½ loop for easy installation, Large 4 ½" round hydrant flag-reduces chance of injury, Individually wrapped and packed 10 to a bundle

Hydrant Setter with Spreader Bar

$ 121.87 $ 143.38

The hydrant setter greatly eases the installation of hydrants which can weigh as much as a half ton. The lifting rings, which are held in proper alignment by the spreader bar, fit over the 2 ½" hose nozzles and are locked in place by the hose nozzle caps.

Hydrant Spring Flag w/Reflective Bands

$ 14.10 $ 16.58

Spring-loaded Hydrant Flags are made of one-piece galvanized spring steel for corrosion resistance. The mounting bracket is part of the spring; a washer is supplied. Four 6" reflective weatherproof bands (two red and two white) are applied to the top section of the hydrant marker for superior visibility.

Hydrant Tag with Cable and Clip

$ 5.05

Galvanized attaching cable with duplex clips, Unbreakable tempered virgin nylon, Numbered or lettered both sides; 3 characters standard; 4 characters available for an additional charge, 6 vivid color combinations, Crimping tool sold separately

Inch and Quarter to Two Inch Service Line Puller Kit

$ 812.83

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾\" and 1\" pipe and one for 1 ¼\" to 2\" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing.

Manhole/Catch Basin Setter Sling

$ 252.32

All slings and setters are pull tested and tagged. Call for certifications.

Meter Box Wrench #1 or #2 Pent Nut

$ 30.56

Made of 1" round stock. Handle is 8" long with chisel point for prying and a slot for operating meter valve on the other. Available for No. 1 (27/32") or No. 2 (11/32") pentagon nuts (see prices below).

Needle Nose Spoon

$ 98.03

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

No 1. Meter Lid Wrench (Std or Slotted)

$ 10.40

These wrenches are used to lock onto and lift meter lids with No. 1 or No. 2 (slotted) pentagon nuts. Slotted pents can also be used to turn the meter valve and the points can be used to pry up covers or clean around the nut.

No. 2 Meter Lid Wrench (Std or Slotted)

$ 13.00

These wrenches are used to lock onto and lift meter lids with No. 1 or No. 2 (slotted) pentagon nuts. Slotted pents can also be used to turn the meter valve and the points can be used to pry up covers or clean around the nut.

NPT Corporation Cleaner

$ 148.38

This tool can be used on corporations stops with NPT threads under the tube nut. The tube nut is removed and the cleaner is threaded on the corporation stop. Once the Cleaner is tightened the corporation can be opened and the drill bit is rotated down through the corporation, cleaning out any debris. After the Corporation Cleaner is removed the corporation is opened to flush out the loose debris. Sizes available: 1/2", 3/4", and 1".

Opening Direction Plate

$ 11.39

Gate Stem Extension Nuts allow you to make your own gate valve extension stems by simply welding, pinning or bolting a length of pipe between them. They are available with attached pipe (shown below) designed to fit inside standard 1 ¼" pipe, or as nuts only. Gate stem extension nuts are available in stainless steel on request.

Oval Link

$ 36.41

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Pipe Cleaner/Descaler

$ 89.93

Our Pipe Cleaner/Descaler uses heavy chain and has more channels than our competitions'. Half of our channels are serrated to clean pipe more efficiently. Sizes available: 3"-12" and 14"-36".

Plastic Adapter

$ 44.02

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Plastic Pipe Splitter

$ 97.17

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Point x Chisel Combo Key with Slotted Pent

$ 22.06

This combination wrench has a slotted pentagon nut on the shaft, which gives it the ability to remove the pent nut from plugstyle covers and to turn the service box rod to open or close the service valve. The handle has a pick point on one end and a chisel end on the other for removing debris and for prying.Ranges from 18" - 24".

Precast Concrete Manhole Barrel Sling

$ 530.00

All slings and setters are pull tested and tagged. Call for certifications.

Precast Sling Pin

$ 51.84

All slings and setters are pull tested and tagged. Call for certifications.

Repair Clamp Tool Kit w/ Ratcheting Gate Wrench

$ 314.00

This Waterworks Ratcheting Gate Tool Package contains an 8' Ratcheting Gate Wrench, a Pipe Descaler, and a Deep Well Socket Set. The Gate Wrench is used to shut off the gate valve and isolate the broken pipe, while the descaler removes the dirt and debris before clamp installation and allows the pipe to seat properly. Once you've isolated the break and cleaned the pipe, you'll need your deep well sockets for installation. The socket set will have every size needed regardless of the clamp size. *All three items will be delivered in one package that can easily be kept together for now and future use.

Repair Clamp Tool Kit w/ Standard Gate Wrench

$ 231.31

This Waterworks Standard Gate Tool Package contains an 8' Standard Gate Wrench, a Pipe Descaler, and a Deep Well Socket Set. The Gate Wrench is used to shut off the gate valve and isolate the broken pipe, while the descaler removes the dirt and debris before clamp installation and allows the pipe to seat properly. Once you've isolated the break and cleaned the pipe, you'll need your deep well sockets for installation. The socket set will have every size needed regardless of the clamp size. *All three items will be delivered in one package that can easily be kept together for now and future use.

Revolving Speed Handle for Handwheel

$ 37.48

The Handwheel is made of ductile iron for strength. The square head cap screw with cup point assures that the handwheel stays locked onto the operating nut. The raised lettering is ½" high minimum. The 2" square nut protrudes ¾" above the handwheel top surface which provides the option of using a Standard Gate Wrench. An optional ¾" speed handle is available for valve exercising.

Rod X Pent SB Wrench with Extended Shaft

$ 50.15

One end of this wrench fits the service box rod and is used to open or close the service valve. The other end is used to remove the plug from plug-type service box covers.

Rod x 2-Hole SB Wrench with Extended Shaft

$ 87.78

One end of this wrench fits the service box rod and is used to open or close the service valve. The other end is used to remove 2-hole service box covers.

Rod x 2-Hole Slide Handle Service Box Wrenches

$ 55.17

The Slide Handle makes this wrench more versatile than one piece wrenches where the handle is fixed on one end or the other. The Rod end fits the service box rod and is used to open or close the service valve. The 2-hole end is used to remove 2-hole service box covers.

Rod x Pent Slide Handle Service Box Wrenches

$ 66.70

The Slide Handle makes this wrench more versatile than one piece wrenches where the handle is fixed on one end or the other. The Rod end fits the service box rod and is used to open or close the service valve. The Pent end is used to remove the plug from plug-type service box covers.

Rod x Pent x 2-Hole on Handle

$ 50.01

This wrench has a rod end on the shaft for opening and closing the service valve and a pent end and 2-hole end on handle for removing either plug-type or 2-hole service box covers.

Rod x Pent x 2-Hole on Handle w/Debris Cleaner

$ 57.59

This wrench has a rod end on the shaft for opening and closing the service valve. The handle has a pent end and 2-hole end for removing either type of service box covers plus a debris cleaner to clean around the plug on plug-type service box covers.

Rounded Nut Grabber

$ 429.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location. The Template can be purchased separately as well.

Rounded Nut Grabber Complete Assembly

$ 490.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location.

Rounded Nut Grabber Template

$ 24.00

The Rounded Nut Grabber is for operating valves that have deteriorated or for rounded operating nuts that a standard gate wrench will no longer open. The process of repairing or removing valves in this condition is costly and time consuming. The R.N.G. Socket is made of heavy cast steel for strength and durability and will easily turn a compromised valve operating nut. This socket works on the "flats and rounds" principle. The socket fits over the 2" nut, grabbing the flat sides of the nut with the protruding rounds when rotated. The rounds will grab before the rotation can go past the corners. This unique tool is designed with a heavy-wall thickness to provide strength and torque capability when dealing with valves that are difficult to turn. The stem is designed to fit firmly into a standard gate valve shaft for pinning or can be supplied complete with a T-handle wrench to your desired length. Each Rounded Nut Grabber is supplied with a template for drilling a hole in a gate wrench in the proper location.

Service & Valve Box Cleaner Standard

$ 285.00

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

Service & Valve Box Cleaner Clam

$ 289.00

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

Service Box Cross Wrench

$ 52.20

This handy, all-purpose wrench is made like an automotive lug style wrench, for ease of use. It has a pentagon end and a 2-hole end for each style service box cover. It has a pick end for prying and a debris cleaner for removing dirt or ice from around the pentagon nut.

Service Box Wrench 2-Hole End

$ 11.16

Service Box Wrench 2-Hole End. For 1¼" & 2½" Buffalo style service boxes only.

Service Box Wrench Curb End

$ 9.94

Service Box Wrench Curb End. For 1¼" & 2½" Buffalo style service boxes only.

Service Box Wrench Rod End

$ 7.34

Service Box Wrench Rod End. For 1¼" & 2½" Buffalo style service boxes only.

Service Box Wrench Slotted Pent End

$ 9.00

Service Box Wrench Slotted Pent End. For 1¼" & 2½" Buffalo style service boxes only.

Shark Grip Spoons

$ 98.03

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

Split Bull Head

$ 153.26

The Split Bull Head gives greater "push/pull" power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions' cable breaks you have to buy a new cable because the bull head is attached to it permanently.

Standard Gate Wrench

$ 45.21

The shaft is made of 1" Schedule 80 steel pipe and has a heavy arch and a 2" square socket end. The handle is 24" long. Optional 2" swivel nut square socket end is available.

Stanley 6-Pc Screwdriver Set

$ 36.35

Features and Benefits: Vinyl grip handle provides greater comfort, Durable alloy steel blade, Precision formed tips ensure a more secure fit, Chrome-plated bars for corrosion resistance. 3/16" x 6" Standard, 3/8" x 8" Standard, 3/16 X 3" Cabinet, 5/16" 6" Standard, 1 pt x 3" Phillips, 2pt x 4" Phillips

Starter Tool

$ 36.41

With a backhoe and the Service Line Puller Kit you can remove old and failing service lines and replace them with new tubing with minimal digging, less property damage, reduced downtime and with less expense than digging the entire service and replacing it. There are two Service Line Puller Kits available, one for ¾" and 1" pipe and one for 1 ¼" to 2" pipe. Each kit contains all the parts needed to remove and replace old copper, lead, steel and plastic pipe. Features: The Split Bull Head gives greater “push/pull” power with its improved grabbing design. Our exclusive Split Bull Head attaches directly to the plain end of the cable, making field repairs simple, should a cable break. If the competitions’ cable breaks you have to buy a new cable because the bull head is attached to it permanently. Our kit includes more parts than the competitions’. Refer to the tables below to see what’s included. Benefits: Far less digging than conventional methods. Less damage to private property. No trench settlement. Reduces amount of time customer’s service is down. Pulls old copper, lead, steel and plastic service lines. Pulls new service line and splits old plastic tubing

Std Spoons w/Yoke & Pins

$ 65.59

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction

Std Valve & SB Spoon

$ 62.22

Features: Twice the holding power of competitors' cleaners, Powder coated for corrosion resistance, Rubber coated handles for better grip, Interchangeable spoons, All welded construction